A heat gun can make many manual tasks easier and faster to complete. One of the most well-known jobs that a heat gun can help with is paint removal.
The warmth a heat gun generates causes the paint to melt slightly, giving it a gooey consistency that's much easier to scrape away than if it's dry and flaky. This method works with many surfaces and types of paint, and is especially helpful when removing multiple layers of paint at once.
Before you gather your heat gun and paint scraper to get to work, review some of the basics of heat-gun paint removal. Here's what you need to know for this project:
How to use your heat gun
Heat guns can be dangerous if used incorrectly. The hot air they produce can reach temperatures of 1,000 degrees Fahrenheit or hotter. These are not tools to use around young children or pets, and if there are other people in the room, they should be aware of what you're doing.
Additionally, users should protect themselves and their surroundings against burns. They should always wear heat-protective gloves and never place an activated heat gun down on a flammable surface. The rooms they work in should be cleared of any potentially flammable or explosive chemicals, including paint thinner and acetone.
— Master Appliance (@MasterAppliance) January 3, 2018
When you're ready to safely start the project, place a drop cloth beneath your working area. Once the heated paint you scrape off cools, it'll be tough to remove from wherever it lands. You might also want to have a throwaway container to put the scrapings into for simple disposal.
Hold the heat gun a few inches away from the surface. Keep the gun moving so you don't overheat any areas. Once the paint begins to loosen – you may see it start to bubble or change form as if it may melt – use a paint scraper or putty knife to remove the paint. If you have good coordination, you can operate the heat gun with one hand and the scraper with the other.
If you're removing from around a window, be careful not to overheat the glass. If you have a dual temperature heat gun, use the lower temperature.
Once all the paint is gone, finish with a mineral spirits wash. It's important that the area is completely cooled at this stage, as mineral spirits are flammable.
Surfaces to use a heat gun on
Heat gun paint removal works for most surfaces, including the following:
Although the process is basically the same across all surfaces, there are a few key points to keep in mind when using a heat gun with specific materials.
Heating metal can release fumes that are dangerous to breathe in. If you can't do this task outdoors, make sure the area is well ventilated. It's also a good idea to wear a respirator when heating metal.
Paint can be removed from concrete, but extremely high heats can damage this material. The heat gun should not exceed 1,000 degrees Fahrenheit. Additionally, while paint can be removed from concrete, stain cannot. This substance seeps into concrete pores and dyes it permanently.
Stone is a naturally porous and uneven surface, so it may be difficult to scrape paint away with a straight blade. A wire brush may be more effective.
When not to use your heat gun to remove paint
Paint that was applied before the 1980s may have lead in it. If you know that the paint is lead based, or you're not sure but know it's more than several decades old, don't remove the paint yourself. Heating up the paint will release toxic fumes, and scraping it away can leave you susceptible. In these cases, it's best to consult a professional.
Heat guns are not ideal for removing paint from plaster walls, as the high temperatures may damage the surface.
Best heat gun for removing paint
The best heat gun for stripping paint is one that is reliable and easy to use safely. Dual temperature heat guns, such as the Ecoheat Heat Gun from Master Appliance, can be helpful when stripping paint from various types of surfaces or when using near glass. To find the right heat gun for your to-do list, explore the options at Master Appliance.